My designs Basket
Safety

Fix it to the wall.

Furniture that isn't fixed can tip over and hurt someone, most often a child climbing it or pulling out a drawer. Fix each piece as soon as it's standing, before you put anything in it.

How to fix it

  1. Check the wall for pipes and cables with a detector. Cables often run straight up, down or across from sockets and switches, so don't drill in line with one.
  2. With the piece against the wall, choose where to fix the back rail, near each end, wherever suits your wall: there are no holes in it, so you can. Slide a packer up from below into the gap behind the rail at each place, its slot at the top.
  3. Drill 8mm straight through the rail and the packer's slot, at least 50mm into the wall. You'll need a long bit.
  4. Push a plug through the rail into each hole, then screw through the rail and packer into it until firm. Don't overtighten.

Is the kit right for your wall? The plugs and screws suit most walls: brick, block, concrete and plasterboard. Into a timber stud, drive the screw in without a plug. They don't suit lath and plaster, metal studs, crumbly brickwork or plasterboard with a wide gap behind it: for those, buy fixings made for that wall. We can't see your wall, so checking is up to you, even if it's one of the walls above: each plug should go in snugly and each screw should pull up tight without spinning. If one doesn't bite, or you're in any doubt, add more fixings or use a different kind.

Something not right? Tell us and we'll help.